5
Rev. 1.0
7/31/2019
SSDC-R/C/IP Hardware Manual
1.3 Safety Instructions
Only qualified personnel should transport, assemble, install, operate, or maintain this equipment. Properly qualified
personnel are persons who are familiar with the transport, assembly, installation, operation, and maintenance of motors, and
who meet the appropriate qualifications for their jobs.
To minimize the risk of potential safety problems, all applicable local and national codes regulating the installation and
operation of equipment should be followed. These codes may vary from area to area and it is the responsibility of the
operating personnel to determine which codes should be followed, and to verify that the equipment, installation, and
operation are in compliance with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from the failure to follow all applicable codes and standards.
Applied Motion Products does not guarantee the products described in this publication are suitable for a particular
application, nor do they assume any responsibility for product design, installation, or operation.
Read all available documentation before assembly and operation. Incorrect handling of the products referenced in this manual
can result in injury and damage to persons and machinery.
All technical information concerning the installation requirements must be strictly adhered to.
It is vital to ensure that all system components are connected to earth ground. Electrical safety is impossible without a low-
resistance earth connection.
This product contains electrostatically sensitive components that can be damaged by incorrect handling. Follow qualified
anti-static procedures before touching the product.
During operation keep all covers and cabinet doors shut to avoid any hazards that could possibly cause severe damage to the
product or personal health.
During operation, the product may have components that are live or have hot surfaces.
Never plug in or unplug the Integrated Motor while the system is live. The possibility of electric arcing can cause damage.
Be alert to the potential for personal injury. Follow recommended precautions and safe operating practices emphasized with
alert symbols. Safety notices in this manual provide important information. Read and be familiar with these instructions
before attempting installation, operation, or maintenance. The purpose of this section is to alert users to the possible safety
hazards associated with this equipment and the precautions necessary to reduce the risk of personal injury and damage
to equipment. Failure to observe these precautions could result in serious bodily injury, damage to the equipment, or
operational difficulty.
