19
Rev. 1.0
7/31/2019
SSDC-R/C/IP Hardware Manual
2.7 Connecting the Power Supply
The SSDC series StepSERVO drive and motor are shipped with a power cable, 2 meters long. Connect the red wire to the
positive of the power supply. Connect the black wire to the negative of the power supply. Plug the cable into the power
connector of the drive.
(NOTE: DO NOT reverse the wires. Reversing the connection may open the internal fuse on the drive and void the warranty.)
SSDC03: 12 – 48VDC
SSDC06: 24 – 70VDC
SSDC10: 24 – 70VDC
V
V
-
-
1
1
V
V
+
+
2
2
J1
Power Connector
Connect the chassis to the earth ground through the grounding screws.
To Earth Ground
The section entitled “Choosing a Power Supply” will help you to select a right power supply.
