© MOOG 2010
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
49
MRJ04410
2-3-2.
INPUT FUNCTION SELECTION AND VALUE
Entry Knob – Used to enter the value of various functions. Rotation in a clockwise direction will increase
the function value.
X10 – increases the sensitivity of the Entry Knob by a factor of 10.
Set – Push to set Item values while the “SET” Led is flashing.
Cursor – Used to scroll the items on the LCD in the direction indicated by the triangular shape.
FUNCTIONS
Used to select the Functions F1 through F5 shown on the LCD display. These functions are:
F1 Profile*
Controls the parison wall profile and other related functions
F2 Marker
A program point marker is validated and also they are a slope and a time setup
F3 File
Allows storage and retrieval of 100 container wall thickness programs and related func-
tions
F4 Monitor
Enables the I/O functions and indicates servovalve input current and die gap position
values during machine operation
F5 Data
Displays the profile point and related function data
F1+SET
Set Up Mode – Provides die gap tooling and other machine related set up functions
F2+SET
Analog monitor assignment to monitor channels.
F3+SET
Delete and Backup/Restore the storage data. (Backup/Restore for data in SD card)
F4+SET
Machine primary setting setup
F5+SET
Communication parameter setting RS422 and Ethernet. And Inter clock time setting
LED’s (LIGHT EMITTING DIODEs)
The Led’s are used to indicate the status of various functions as follows:
Start
Lights when the cycle Start signal is received
Die Gap
Lights when the Die Gap signal is received and “DIE GAP” on the LCD is back lit
Continuous
Lit when the “Continuous Extrusion” machine type is selected
Accumulator*
Lit when “Accumulator” machine type is selected
Divergent
Lit when “Divergent” die gap tooling is selected
Convergent*
Lit when “Convergent” die gap tooling is selected
End of filling
Lights when the accumulator completes its charging stroke
Point Out
Lights when each Marker point is reached
End of extrusion* Lights when the accumulator completes its empty stroke
*LED is lit in
Figure 2-5
