© MOOG 2010
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
41
MRJ04410
UNIT____________________
Two UNITs are available, % or MM. The Unit selected will be
applied to the following parameters: on the F1 screen:
SHOT SIZE
DIE GAP
DELAY
CUSHION
Select either % or MM and press SET
STROKE________
Use the ENTRY KNOB to indicate the length of accumulator
Linearpot.
Full Stroke is set as Linearpot full stroke length. (ex,
0-10V=500 mm, Full stroke set to 500.0). The Stroke will
automatically calculate from Empty/Full setting. Which mean
100%=Stroke (mm) showing Accumulator position reference
on any display.
Press SET, Back is selected, press SET again to get to the SET UP screen.
The Accumulator blow molding machine set up process is now complete.
Figure 1-47 Extrusion Fixed, Filling Fixed,
Unit, Accumulator Stroke and Back
