© MOOG 2010
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
63
MRJ04410
Load or Load SD
If you select “Load or Load SD” (
Figure 2-17
), using the
Entry Knob and Set Key. The file list is displayed, starting at
“No. 0 Initial file” (
Figure 2-24
). In this mode, files 0 to 100
are displayed in blocks of 5. You can find the required file by
using the Entry Knob (the display cursor moves through the
files in order) and the Cursor (jumps files in blocks of 20) to
find the desired file. Then press the Set Key.
Figure 2-25
, is displayed at the bottom of the LCD display.
Select “Quit” or “Load” or “Next” with the Entry Knob and
Set Key.
If “Load” is selected the file loads and is displayed in F1
Profile Mode. If you select “Quit”, the initial F3 File Mode,
Figure 2-17
, screen is displayed and no file is loaded.
If “Next” is selected, described other parameters.
Setup data (for example GAIN, DCDT Zero/Span,
etc.) will be loaded only for reference because of the
machine safety.
Figure 2-24 Initial Load Screen
Figure 2-25 Load a File?
