Page 25
XG0526-151109.2
I-Series Indoor Gas Fireplace
Installation
2) Install the Rear Faceplate Panel support brackets using screws
provided (4 locations). Ensure proper orientation of the bracket.
Figure 45 Sec.4
Standard Faceplate Kit Contents
Figure 46 Sec.4
The Rear Faceplate Panel
Figure 47 Sec.4
1). Remove the Lighting Instructions from the Control area and
leave on the floor in front of the unit.
Figure 48 Sec.4
Figure 49 Sec.4
Figure 50 Sec.4
Standard and Oversized Faceplate Installation
The Faceplate Surround has two main parts: the rear panel and the
front panel. The rear panel has a master override switch installed
on the upper right corner. The rear panel has to be installed prior
to the front panel.
Found behind
panel
Screws
supplied
3) Align the Rear Faceplate with the front of the fireplace.
