Page 33
XG0526-151109.2
I-Series Indoor Gas Fireplace
Installation
Firestones or Fireglass Installation
If your fireplace has already been in operation, disconnect the gas
and electrical supply, remove the door and safety barrier.
1). Open the 9lbs of glass media purchased from your Montigo
Dealer. You only need 8lbs - remove approxmiately 1lb.
Figure 86 Sec.4
Figure 87 Sec.4
Figure 88 Sec.4
2). Do not drop any glass media into the pilot. To protect the pilot
when installing the glass media, place a piece of tape over the
pilot opening. Remove tape when media installation is complete
and before operating the unit.
3). Evenly distribute the glass media around the burner tray. Make
sure there is only one layer of glass media covering the burner ports.
Figure 89 Sec.4
4). If you used tape to cover the pilot opening, remove it now.
Figure 90 Sec.4
Figure 91 Sec.4
Completed firestone installation
