Page 55
XG0526-151109.2
I-Series Indoor Gas Fireplace
Maintenance
4).
Remove 3 screws that hold the Firebox Baffle in location.
Figure 30 Sec.6
Figure 31 Sec.6
5).
The Firebox Baffle can be lowered at the front and then pulled
forward away from 2 studs that secure the rear.
6).
Remove the 4 screws that secure the bypass plate to the
bottom of the Heat Exchanger.
CAUTION: Screws may be tight. Use DW40 to help reduce the
risk of screws stripping or breaking heads.
Figure 32 Sec.6
7).
Once the Restrictor has been removed, it is important that you
return the screws to their locations again.
8).
Re-install the Firebox Baffle, left and right Upper Firebox Panel
Retainers, Firebox Panels and Burner assembly and door.
Figure 33 Sec.6
