18
UNPACKING
1.
Place the box on a flat, clean work surface.
2.
Open the box. Remove the two pieces of styrofoam packing, then lift the printer
out of the box and place it on the work surface.
3.
In the bottom of the carton you can find a spool of filament, the spool holder, a
power cord, a USB cable, a filament guide tube, a glue stick, and a tool bag
containing a USB stick, two Allen wrenches, a stamping wrench, an unclogging tool,
a package of grease, and a screwdriver.
4.
Remove the plastic wrap from the outside of the printer.
