The Taskbar ‘Extras’
Read device settings
Serves to activate a connection for the software to the
Humi
Core
™
Pro
system (See “Connect configura-
tion program” in Section 6.3).
Program parameters
If any user data parameters are changed in the
Humi
Core
Config program, they must be stored/entered to
be retained. You must do this manually via the button ‘Program parameters’ or use the blue arrow symbol in
the symbol bar. Confirm the following confirmation prompt with ‘OK’ to start transfer of the data.
(See Figure 19)
When the data have been transferred successfully, the procedure is concluded by confirming with the ‘OK’
button in the following window (Figure 20):
A change in the calibration values cannot be saved in this process.
Program parameters and calibration
If one of the variables of the calibration has been changed in the user interface, it has to be added manually
to the
Humi
Core
™
Pro
. This is done by using the button ‘Program parameters and calibration’. Confirm
the following confirmation prompt with ‘OK’ for successful transfer of the data. (See Figure 21)
The following window (Figure 22) then confirms successful transfer of the data:
14
Figure 19
Figure 20
Figure 21
Figure 22
