12
You select the following settings using a pull-down menu:
Connection
Selection of respective PC port (COM 1-4).
You can see which Com port you use on the computer
in the Control Panel => Device Manager.
Device address
If the connection to the PC is made via the USB port, you can select
‘Direct’. If the connection is made via a network, e.g. via a PLS, you have
to enter the respective device address.
Baud rate
Fixed value ‘19200’
Language
‘German’, ‘English’ and ‘Italian’ are available as menu languages.
Once the desired settings have been made, confirm them with ‘OK’.
After you have inputted the parameters, the connection between the PC and
Humi
Core
Pro
has to be
set up. Two options are available for this:
1. Upper taskbar ‘Extras’ => ‘Read device settings’ (See Figure 14) or
2. Click on the button ‘Read device settings’ in the symbol bar (See Figure 15)
Figure 15
Figure 14
Figure 13
Connect configuration program
A connection must exist between the
Humi
Core
™
Pro
transmitter and the PC in order to use the program.
Input the interface parameters via the tab ‘Extras’ =>‚ ‘PC-Settings’ (See Figure 13).
