13
After the connection has been set up successfully, the following window appears (See Figure 16).
The connection setup is concluded by clicking on the ‘OK’ button.
The Taskbar ‘File’
Save Confi guration
It is recommended to create a backup fi le after
every change in the confi guration data in the
Hu-
mi
Core
™
Pro
transmitter or after every calibra-
tion of the sensor.
To save the new setting, click on the button ‘Save
confi guration’. The window on the left appears to
save the confi guration fi le. (See Figure 17)
Enter the desired name in the fi eld ‘File name’.
Then click on the button ‘Save’.
The fi le is saved with the designated name in the
manually set-up target directory.
If required, e.g. in the case of data loss or product
group changes, you can load stored fi les and in-
put them in the transmitter again.
In the event of data loss or use of other prod-
uct groups, the fi les stored under Save confi gu-
ration fi le can be loaded in HU_confi g-300 at
any time. The loaded fi le must be transferred to
the
Humi
Core
Pro
transmitter by means of the
switch ‘Program parameters’. (See Figure 18)
Enter the fi le name looked for in the fi eld ‘File
name’.
Confi rm the selection with the button Open. Then
the selected fi le is available.
Figure 16
Figure 18
Figure 17
Load confi guration
