Specification and Adjustment Manual - ARDAC IBA5
Document Number 44X501R2 – March 15, 2004
7-1
7.
7
Recommended Spare Parts
And Diagrams
Introduction
This section provides service, repair, and recommended spare parts information. The parts diagrams listed
in Table 7-1 may be ordered from the Money Controls Service Department. The Money Controls address,
phone, and fax numbers are provided in the front of this manual.
Service and Replacement Parts Manual
The comprehensive Service And Replacement Parts Manual covers all models of IBA5 and WACS5
systems. The manual is a supplement to this Service and Adjustment Manual. Refer to it when ordering
service and replacement parts. The diagrams and parts lists of the manual cover:
- IBA Acceptor Parts
- IBA Stacker Parts
- IBA Chassis Parts
To order this manual, contact the Money Controls Service Department.
Spare Parts Recommendation
A list of recommended spare parts is provided in Table 7-1. This list includes only the spares for the
System listed. To obtain quantity recommendations and current pricing, contact the Money Controls
Service Department.
Board Locations
The printed circuit boards, which control the system, are located in the acceptor. The board locations are
illustrated in Figure 7-1.
Bottom Sensor Board
The bottom sensor board is located in the inside of the note acceptor, immediately beneath and parallel to
the note path.
