Moneris vx810 duet, Operating Manual

Page: 33 / 193

2. Features and Procedures
2.2.10 Dial Communications Parameters (Edit CPT Menu)
Use the Edit CPT menu to edit dial communications parameters.
Transactions menu > CONFIGURATION menu (press the green OK key) > Setup menu > Comm >
Edit CPT menu
Note: For instructions on navigation through the menus, see The Menu Feature .
IMPORTANT: Some parameters cannot be edited unless the terminal batch is empty. If the "Edit
Not Allwd Batch Not Empty" message appears, perform a
Batch Close transaction then try editing
the parameter again.
Pri Auth Phone
The Moneris phone number is automatically loaded into this parameter during initialization .
If blank, key in the Moneris authorization phone number and press the green OK key.
Sec Auth Phone
The Moneris phone number is automatically loaded into this parameter during initialization .
Pri Sett Phone
The Moneris phone number is automatically loaded into this parameter during initialization .
Sec Sett Phone
The Moneris phone number is automatically loaded into this parameter during initialization .
Pri Init Phone
The Moneris initialization phone number.
If blank, key in the Moneris initialization phone number and press the green OK key.
Sec Init Phone
This is the same value as Pri Init Phone .
Baud Rate
Sets the data transmission rate of the dial modem.
300 BAUD
1200 BAUD (default)
2400 BAUD
4800 BAUD
9600 BAUD
14400 BAUD
Mdm FastConnect
Do Not change this parameter unless directed by Moneris.
Moneris Vx810 Duet Operating Manual 23