Monaco Executive 2005, Owner'S Manual

Page: 403 / 538

Electrical Systems - Chassis --- Section 9
The Executive 2005
403
Operation
The system is turned on and off using the ignition. Turn the instrument lighting on and off with
headlight switch.
To change lighting intensity:
1. Turn on the headlight switch.
2. Press to increase instrument lighting intensity.
3. Press to decrease instrument lighting intensity.
The audible alarm is used to alert the driver of a warning condition while traveling. The warning
will then be displayed on the LCD.
To disable audible alarm in normal mode:
1. Press and hold both and buttons until the beep stops.
To change LCD display:
• Press M to scroll through display screens:
• Odometer • Trip odometer 1 • Trip odometer 2 • Engine Hour • Clock
Data will display, automatically, two seconds after selecting desired screen.
To reset Trip Odometer 1:
1. When TRIP 1 is displayed on LCD, wait two seconds for LCD screen to show trip
mileage.
2. Press and hold M to re-set to zero.
To reset Trip Odometer 2:
1. When TRIP 2 is displayed on LCD, wait two seconds for LCD screen to show trip
mileage.
2. Press and hold M to re-set to zero.
To set clock:
1. When CLOCK is displayed on LCD, wait 2 seconds for time to be displayed.
2. Press and hold M until clock flashes.
3. Press to change minutes. Press to change hours.
4. After clock is set press and hold
M until clock stops flashing.
NOTE:
Time is displayed as a 24 hour clock.