Monaco Executive 2005, Owner'S Manual

Page: 187 / 538

Appliances --- Section 4
The Executive 2005
187
The Bedroom comfort control will operate rear roof air conditioner functions and (if equipped)
the center roof air conditioner.
• Press the MODE button repeatedly until Cool is displayed.
• Press the ZONE button to alternate between Zone One and Zone Two. Zone One controls
the bedroom roof air conditioner and Zone Two controls the center roof air conditioner.
• Set desired fan speed by pressing the FAN button.
• Press the UP or DOWN buttons to set desired cooling temperature.
NOTE:
The compressor will engage approximately two minutes after blower motor activation.
This prevents accidental compressor activation against high pressure.
Heat Pump
Heat Pump mode offers heat by using the air conditioner as a heat
source. The air conditioning principle is reversed, supplying heated air to
the ceiling registers instead of refrigerated air. There are ambient temper-
ature limitations of the Heat Pump mode.
NOTE:
The roof air conditioner will not operate in Heat Pump
mode with ambient temperatures at or below 30º F.
Aux Heat Mode:
The Aqua-Hot needs to be on when the Aux Heat cycle begins. Turn
on the Aqua-Hot diesel burner or electric element. The exchanger blowers
automatically begin operation in the Auxiliary Heat mode.
If the Heat Pump mode is selected at or below 30° F., or if operating in Heat Pump mode and
temperature drops to 30º F., the air conditioner will stop Heat Pump operation and Aux Heat will be
displayed. The Aqua-Hot will be selected as the auxiliary heat source and will begin operation. The
Aqua-hot will remain the primary heat source until ambient temperature rises above 42º F. When ambi-
ent temperature is between 30 and 42º F., a defrost cycle is initiated approximately every 40 minutes of
compressor operation. The blower motor will stop for five minutes and
Defrost will be displayed. After
the defrost cycle the heat pump operation will resume.
The Aqua-Hot the diesel burner or electric element will need to be turned on. The exchanger blow-
ers will automatically begin operation.
050200b
Heat
Pump