Molecular Devices MultiWash+, User Manual

Page: 47 / 152

Chapter 4: Priming or Rinsing the Fluidics System
5032022 C 47
Defining the Liquid Volume for the Prime or Rinse Process
Define the volume of liquid to dispense during the periodic prime or rinse process.
Figure 4-21: The Volume prompt
Button Action
On the left
Press this button to end the process and return to Prime/Rinse . See Priming or
Rinsing the Fluidics System on page 31 .
On the right
The button has no function for this option.
Press this button to increase the dispense volume by 1 mL, up to a maximum of
200 mL.
Press this button to decrease the dispense volume by 1 mL, down to a minimum of
1 mL.
Press this button to confirm the dispense volume and then define the time between
each periodic prime or rinse process. See
Defining the Interval Between Each Prime
or Rinse Process on page 48 .
Table 4-14: Actions of Control Panel Buttons