Mocon AMETEK Dansensor MAP Check 3 Vacuum, User Manual

Page: 62 / 92

60 User Guide EN Dansensor
®
MAP Check 3 Vacuum
P/N 320598-G
11/2019
General setup
Selecting General setup from the Main menu will display a menu with available setup
parameters.

“Supervisor” access level is required for this menu, as the parameters in this menu control the
basic functionality of the device.
The General setup menu holds the following items:
Autostart No Device must be started manually using the

“Measure” button on the display
Yes The device starts automatically when heating

period ends.
Disable faults No All faults are detected and READY relay contacts

will be activated to stop packaging machine logic.
Yes All faults are detected but external signalling is

disabled.

This is used as last resort if you want to be able to

run packaging machine even though an error

exists in the device.

This setting will be indicated in the measure

screen by a warning symbol and a red text saying

"Faults disabled".
External mixer settings Opens the External mixer settings screen

See "External mixer settings" on page 61 for details.
Buffer measuring setup Opens the Buffer measure setup screen

See "Buffer measure setup" on page 62 for details.
Cycle counter Can be set to any number. Counter is set to 0 from the factory.

Can be set to match the packaging machine cycle counter.
Data log setup Opens the Data log setup screen

See "Data log setup" on page 63 for details.
Network setup Opens the Network setup screen

See "Network setup" on page 68 for details.
User label: This item is a user configurable text that will be combined with
data logging information. Examples of use could be
manufacturing line identification or other similar data.

See "User label:" on page 68 for details.
General setup