Mocon AMETEK Dansensor MAP Check 3 Vacuum, User Manual

Page: 37 / 92

Dansensor
®
MAP Check 3 Vacuum EN User Guide 35
P/N 320598-G
11/2019
Text colors indicate the following:
Black indicates that the result is within limit or that no limit

has been defined for this gas.
Orange indicates that the gas concentration has exceeded

the set warning value.

The arrow symbol to the right of the value indicates

whether it is an upper or lower warning.
Red indicates that the gas concentration has exceeded

the set alarm value.

The arrow symbol to the right of the value indicates

whether it is an upper or lower alarm.

Status Shows current status of the device e.g. “Ready” or “Measuring”

Faults disabled This symbol indicates that faults has been disabled in
“Measure setup”.

All faults are detected but external signalling is disabled.

This is used as last resort if you want to be able to run
packaging machine even though an error exists in the device.

Product key Takes you to the “Products” list for selection of product.

See "Selecting a product for measuring" on page 36 for details.

Menu key Takes you to the “Main menu”.

See "Main menu" on page 53 for details.

Measure/Stop key Starts/stops measurement.

Mixer connection (Only appears if External mixer is enabled)

Shows current connection status of the external mixer.

= Connection OK

= No connection
Pressing the icon changes the screen to display the mixer flow,
mix and pressure readings.

Cycle count Shows the number of completed packaging machine cycles

Buffer measurement (”Buffer” versions only)

Displays the result of the latest buffer measurement. Read-out
includes time of measurement, O
2
/CO
2
values and buffer
pressure.

Text colors indicate the following:
Black indicates that the result is within limit or that no limit

has been defined for the gasses and the pressure.
Orange indicates that the result has exceeded the set

warning value.
Red indicates that the result has exceeded the set alarm

value.
The small display is also a key that you can press to start a
buffer measurement manually.