Mocon AMETEK Dansensor MAP Check 3 Vacuum, User Manual

Page: 49 / 92

Dansensor
®
MAP Check 3 Vacuum EN User Guide 47
P/N 320598-G
11/2019
Replacing air inlet and outlet dust filters
CAUTION! Clogged air inlet and outlet filters can lead to overheating of the device.

Therefore they should be replaced or cleaned regularly, especially when device is
used in a dusty environment.

To replace the air filters do the following:

Release the ventilation grille

.
TIP! If grille does not come off easily, you can use a screwdriver

or the like to release it.


The filter

is located inside the grille. You can choose to replace both the grille

and the
filter

or only the filter

.
CAUTION! Never remove the screws

from the inside grille as they also hold the
fan inside the device.

1
3
4
2