Mobotix Cloud Bridge, User Manual

Page: 19 / 102

MOBOTIX Cloud Bridge Connection
Connect the MOBOTIX Cloud Bridge to the Internet. Use the WAN Ethernet port on the bridge and connect to
your router or modem. This can be done either through a switch or directly. DO NOT CONNECT THE
MOBOTIX Cloud Bridge CamLAN PORT TO YOUR REGULAR NETWORK -- IT IS FOR CAMERAS ONLY! Accidental
connection of the MOBOTIX Cloud Bridge to an existing network will serve addresses to any devices that are
set to DHCP client. The CamLAN port does not allow Internet connection whatsoever. It is a private network
designed just for cameras in order to isolate them from the wide area network (WAN).
PoE Switch
Connect an Ethernet PoE switch to the CamLAN port of the MOBOTIX Cloud Bridge. The MOBOTIX Cloud
Bridge CamLAN port provides DHCP addresses for the cameras and is non-routable to the WAN. Alternatively,
cameras may be connected to the same switch as the WAN port of the bridge. If you are using managed
switches, be sure to enable Multicast.
Log Into your MOBOTIX Cloud Reseller Account and Create a Customer Account
Login into your MOBOTIX Cloud account at www.mobotixcloud.com/login.html. If your company does not
have an account, please contact MOBOTIX support (
support@mobotix.com ). After logging in, you will see
your Reseller Dashboard, and you can create a sub-account by clicking the Add Sub-Account button. After
the account has been created, select the Eye icon next to the customer name to jump into the sub-account.
Installation and Setup
Overview
19 / 102