29
Service and Maintenance
Annual Service Contract
Users in high demand environments should consider purchasing
the Mobilarm V100 Annual Service Contract.
)RU D ¿[HG DQQXDO IHH 0RELODUP ZLOO FKHFN DQG UHSODFH DV
necessary all serviceable parts, pressure test and fully recertify
the device. For full details go to www.mobilarm.com or contact
your authorised Mobilarm service agent.
Replacing Faulty or Damaged Units
If the Mobilarm V100 has failed a test phase, or the integrity
of the device is in doubt, immediately take the device out of
service and contact your authorised Mobilarm service agent
for it to be assessed and replaced if required. Cleaning the
Mobilarm V100
Cleaning the Mobilarm V100
Caution
!
Do not paint your Mobilarm V100 or clean it with detergents
Ŷ
or solvents. Seals may be damaged by cleaning materials
and affect the integrity of the device.
If the device requires cleaning, ensure the
Ŷ
ARMING SWITCH
is in the
[OFF]
position so that it cannot be activated by
contact with water and wipe with a damp cloth only.
Further Support
Please consult the Troubleshooting and FAQ sections of this
manual or speak to your authorised Mobilarm service agent for
assistance with using and testing your Mobilarm V100.
Refer to the ‘Support’ section online at www.mobilarm.com
for further technical information regarding the Mobilarm V100
and other Mobilarm products and services. Alternatively, email
Mobilarm at [email protected] or call +61 (0)8 9315 3511
between 8:30am and 5:00pm WST (GMT + 08:00).
v100_user_v5.indd 29
25/06/2009 2:17:09 PM
