24
Performing a Full Test
Ensure the
1
ARMING SWITCH
is in the
[OFF]
position.
Press and hold the black
2
TEST BUTTON
on the
rear of the unit for 3 seconds.
This activates the test sequence.
The
Ŷ
STROBE
ÀDVKHVTXLFNO\IRUVHFRQGV
Listen for the automated message “V100 test
3
menu, run all tests” followed by short beeps.
This indicates the test has commenced. The Mobilarm V100
will then run through the tests one by one.
The
Ŷ
STATUS LED
cycles through green, orange and
red.
$XGLRDOHUWVEHHSVDQGDXWRPDWHGPHVVDJHVFRQ¿UP
Ŷ
that each new test has commenced.
Once the Mobilarm V100 has completed all the
4
tests, the device will turn off.
Table 2: Mobilarm V100 Test Indications (
Î
27
)
v100_user_v5.indd 24
25/06/2009 2:17:08 PM
