13
How to Use the Mobilarm V100
Manually Activating the Mobilarm V100
Press and slide the
1
ARMING SWITCH
down to
[ON]
.
This can be performed when the
ARMING SWITCH
is in the
[OFF]
or
[READY]
position.
The
Ŷ
STROBE
RQWKHGHYLFHEHJLQVWRÀDVK
The
Ŷ
STATUS LED
illuminates to indicate that the
device is active.
An automated message warns the user that the device
Ŷ
has been activated.
This short warning period allows the user to deactivate the
device if it has been inadvertently activated. The device then
commences full emergency transmissions:
The
Ŷ
STROBE
and
STATUS LED
VWDUWÀDVKLQJ
Audio alerts (beeps and automated messages) notify
Ŷ
the user that the device is transmitting.
When the device is transmitting, the
FLEXIBLE ANTENNA
should be released to maximise the alerting range.
How to release the
Î
FLEXIBLE ANTENNA (
14
)
Visual and Audio Indications when Activated (
Î
18
)
Important
Once activated, ensure the top of the unit is not
Ŷ
obscured or submerged so that the
GPS ANTENNA
can aquire and lock its position.
7KH RSHUDWLRQDO SUR¿OH SURJUDPPHG LQWR WKH GHYLFH
Ŷ
determines the message content, interval and channels
used to broadcast the emergency transmissions.
2SHUDWLRQDO3UR¿OHV
Î
32
)
v100_user_v5.indd 13
25/06/2009 2:17:03 PM