7
4. SENSORS AND DEVICES
Several external sensors can be connected to the two inputs. The Mobeye MS100BK can
also switch external devices connected to it via the outputs after receiving an SMS
command.
And although the Mobeye MS100BK is designed to run on batteries, it is possible to use an
external power supply in order to report power failure and to remotely control the system.
Please find below the architecture of the main unit.
Inputs
External sensors can be connected to the inputs. Upon closing (or opening) an input, the
Mobeye MS100BK will send an alarm message to the set alarm numbers (factory default:
SMS and call).
Outputs
The Mobeye MS100BK has two outputs (O1 and O2).These relay outputs can switch
external devices. The maximum load is 2A/30V per output.
When connected to an external power, the GSM module is active all the time, able to receive
SMS commands. This enables remote control (see 6.15).
Summary of Contents for MS100BK
Page 1: ...Installation manual Mobeye MS100BK GSM Measure Control and Alarm module SW version 7 n...
Page 2: ......
Page 23: ......
