Mobeye MS100BK, Installation Manual

Page: 20 / 23

18
9. REPORTS AND LISTS
The programmed settings and the Mobeye MS100BK status can be requested as SMS-text
message via the keypad or SMS-command (for SMS: be sure the unit is in program mode).
9.1 STATUS REQUEST
The status can be requested via
‘CODE menu 501 OK’ or by sending an SMS with the
content:
CODE STATUS? The originator of the request receives the armed/not armed status, the
status of the inputs, power and batteries as SMS text message.
9.2 LIST OF SETTINGS
The settings can be requested via
‘CODE menu 10 OK’ or by sending an SMS with the
content:
CODE SET?
The originator of the request receives the list of basic settings.
9.3 AUTHORISATION LIST
The list with authorised numbers for remote control can be requested via ‘CODE menu 200
OK’ or by sending an SMS with the content:
CODE ANL?
The originator of the request receives the authorised numbers as list.
9.4 TEST GSM NETWORK STRENGTH
Before using the Mobeye MS100BK is it advised to test the GSM signal strength at the
location.
•
Enter the installation code
•
Press “menu”
•
Press “512”
•
Press “OK”
The Mobeye MS100BK will search for all available networks. It also checks the network
strength of the SIM card provider in the device. If you want to leave the function before it is
ready, please press “OK” twice.
The GSM signal strength for the actual network can be read from the LED indicator:
LED Description
Green during 30 seconds Signal is very good
Flashing green Signal is good
Red Signal is weak
Flashing red Searching, no valid SIM card or SIM card is not pin
code free or no signal
The telephone number at memory position 01 will receive an SMS text message, containing
all existing GSM networks, sorted by provider. It also tells the strength of each network.
Warning
In the event of a weak signal, the Mobeye MS100BK can still be used, but there is a risk that
messages cannot be sent or will be received with a delay. In case of no signal, it is advised
to try a different network.