Mobeye MS100BK, Installation Manual

Page: 15 / 23

13
7. ACTION RULES
The alarm message and behaviour of the outputs of the Mobeye MS100BK are programmed
by action-reaction patterns. These so-called Action Rules are pre-programmed, according to
the needs of many applications. However, it is possible to change these action rules (for
advanced users only!).
The trigger + related re
actions are called an “action rule”. Each action rule may contain 3
reactions. A maximum of 15 action rules can be programmed.
7.1 PRE-PROGRAMMED ACTION RULES
In the factory defaults following action rules are pre-programmed:
Action rule
number Trigger Reaction
1 Receive SMS Switch outputs
2 Power failure Send SMS + call
3 Power restored Send SMS
4 Input 1 triggered Send SMS + call
5 Input 2 triggered Send SMS + call
6 Input 1 restored Send SMS
7 Input 2 restored Send SMS
The SMS texts are stored with a text number referring to the number of the action rules (e.g.
TEXT2 and TEXT3). Texts for new action rules are stored and can be changed too (e.g.
TEXT8). Please refer to 6.10.
7.2 TRIGGERS AND REACTIONS
TRIGGERS
For defining your own action rules, you can use triggers and combine them with reactions.
As trigger the following events can be used:
Trigger Command
Input 1 triggered IN1
Input 2 triggered IN2
Input 1 restored IN1RESET
Input 2 restored IN2RESET
Power failure POWERFAIL
Power restore POWERRESET
Incoming call CALL
Time TIME:hhmm (e.g. TIME:1230)
Trigger Reaction
1
Reaction
2
Reaction