Mobeye MS100BK, Installation Manual

Page: 10 / 23

8
5. CONFIGURATION METHOD
The Mobeye MS100BK settings can be changed via the keypad or via SMS commands. First
the method of programming is discussed, in next chapter the settings are described.
5.1 CONFIGURATION VIA KEYPAD
To configure the settings via the keypad, follow these instructions:
•
Enter your 4-
digit code (factory setting is “1111”)
•
Press “menu” - light turns green
•
Enter the menu number (see list below)
•
Press “OK”
•
Enter the new setting
•
Press “OK”.
The light switches off, a confirmation melody is played
In the event of an incorrect entry, the light turns red and a short beep sounds. The menu can
be left from any position, by twice pressing “OK”.
Examples (code is 1111):
To program a telephone number at memory position 2
1111 MENU 102 OK 004934578692 OK
To set the SMS to OFF (just call):
1111 MENU 12 OK 0 OK
5.2 CONFIGURATION VIA SMS TEXT MESSAGES
Almost all options can be set via the keypad (except the texts). It is also possible to program
by sending SMS commands to the SIM cards’ telephone number in the Mobeye MS100BK.
5.2.1 Program mode
If the unit runs on external power, it is always in program mode, ready to receive SMS
commands.
For programming a battery operated Mobeye MS100BK, first switch to the
program mode:
•
Enter your 4-digit code
•
Press “menu” -> light turns green
•
Enter
“21”
•
Press “OK”
First the light flashes red (interval ca. 1 sec). As soon as the light turns green, the Mobeye
MS100BK
is able to receive SMS-messages. After five minutes there is a time-out and a
beep is heard. Leave the program m
ode earlier by pressing “OK” twice.