Mobeye MS100BK, Installation Manual

Page: 12 / 23

10
6. CONFIGURATION POSSIBILITIES
This chapter describes the possible settings in the Mobeye MS100BK.
6.1 INSTALLATION CODE
The installation code is the 4-digit code for switching on/off and programming the settings or
activating
the special functions. Factory default is “1111”. It is possible to change the code to
any 4-digit number. Please change the code to make the unit more secure.
6.2 USER CODE
The Mobeye MS100BK offers the possibility to set a personal 4-digit user code, for just
arming and disarming the system. It is not possible to change the settings with the user
code. The system needs to be switched on and off using the same code; the installation
code and user code are not interchangeable.
Factory settings for the user code is “8888”.
This code can be changed by the installation code or user code (menu number 50). We
recommend that you change this code to make the unit more secure.
6.3 TELEPHONE NUMBERS
Up to five telephone numbers can be programmed in to the Mobeye MS100BK. In the event
of an alarm the Mobeye MS100BK first sends an SMS text message to all numbers, next
they are called. It is possible to confirm the call, after which the other numbers will not be
called anymore.
Note: the first telephone number is required, the others are optional.
6.4 SMS ON/OFF
By default, the Mobeye MS100BK sends alarm notifications via text message and calls to
the preset contact persons. By turning off the SMS, the unit will only call after the sensors
send an alarm.
6.5 CALL ON/OFF
By default, the Mobeye MS100BK sends alarm notifications via text message and calls to
the preset contact persons. By turning off the CALL, the unit will only send an SMS text
message as alarm notification. It is not possible to switch off both the SMS and the call.
6.6 INTERVAL TEST MESSAGE
The Mobeye MS100BK can send test messages. Through these
‘keep alive’ reports you will
be informed about the status of your Mobeye MS100BK. You can set the interval between
the test reports. This is adjustable between 0 (no test reported) and 30 (every 30 days a test
message). Note when MS100BK is battery-operated: the interval of 1 day will result in a daily
test message; the exact time between the messages will be about 24 hours.
The smaller the interval between the test reports, the shorter is the battery life. The test
message only works if the system is on.
6.7 SET ACTUAL TIME AND DATE
If the system is to be armed automatically, the internal clock time needs to be correct. Some
Telecom providers offer this in the network, to be synchronised by the Mobeye MS100BK
during the start-up and after sending test messages. It is possible to set the time and date
manually. To view the clock time, send a list of the settings to the first programmed phone
number (CODE MENU 10 OK).