
68
4 Stainer firmware reloading with SD-card
4.1 and SD card requirements:
- SD card capacity: 512 MB to 32 GB
- SD card file system: FAT32; allocation unit size (cluster size): 32 KB
4.2 The procedure for reloading of the firmware using an SD card:
Switch on the Stainer. The reloading firmware
of Stainer is performed in the menu
<SERVICE>: CONFIGURATION
SERVICE.
4.2.1
Select the desired firmware reloading option:
- for reloading, only technological programs select <TECH. PROGRAMS RELOADING>;
- for reloading only Stainer microcontroller software select <SOFTWARE RELOADING>;
- for reloading both technological programs and Stainer microcontroller software, select
<
TOTAL FIRMWARE RELOADING>,
By default, reloading of technological programs <TECH. PROGRAMS RELOADING> is
set.
4.2.2
Switch on the Stainer and remove the SD card.
4.2.3
Insert the SD card into the computer with SFE software.
4.2.4
Copy the finished AFOMK12.bin firmware file to the SD card or create and save the
FS-12-25 firmware .bin file via the SFE software. The SOFTWARE version is displayed in
the SFE program.
4.2.5
Remove the SD card from the computer.
4.2.6
Insert the SD card into the slot of the Stainer.
4.2.7
Switch on the Stainer. A message about reloading and a bar indicating the reloading
process will appear on the screen.
4.2.8
After the rewriting process is complete, the flash screen with the logo will appear,
and the Stainer will go to the main menu.