
38
accessories and manipulator. The test program is recommended for the commissioning of
the Stainer
(Item 6.3) and the identification of faulty accessories.
WATER SUPPLY – PROGRAMMED
WATER SUPPLY – CONTINUOUS – is
intended to set the mode of water supply into the flow-through trough.
- <PROGRAMMED> – water supply turns on automatically as soon as the rack is
positioned at the flow-through trough,
- <CONTINUOUS> – water supply to the flow-through trough is on all the time.
To switch between modes, press the button.
ACCEPTANCE TEST – service section for acceptance tests, which is protected with a
password. The section is used by engineering personnel of the manufacturing company
and by personnel of certified testing centers during tests. This mode is unavailable for lab
personnel.
SOFTWARE VERSION
– version of the software appears on the screen when the button
is pressed.
TECH. PROGRAMS RELOADING
SOFTWARE RELOADING
TOTAL FIRMWARE RELOADING
- is intended to set the mode of firmware reloading
by changing data in SD card. The data in SD card is changed with «FASTAINER firmware
editor» PC software. (APPENDIX F).
RESERVE
– inactive buttons, reserved by the manufacturer.
FACTORY RESET – resetting to the initial configuration of the manufacturer. To perform
the factory reset, select this section and press the button YES.
CAUTION!
HEREWITH ALL THE PROGRAMS AND NAMES OF REAGENTS,
PROGRAMMED BY THE USER WILL BE DELETED.