
42
(technique), and returns to the loading position above station No. 3, herewith a message
appears on the screen again:
<PUT THE RACK IN THE MANIPULATOR
AND PRESS THE BUTTON
<CONTINUE> - TO UPLOAD ONE MORE RACK
<FINISH> - TO FINISH THE UPLOADING>
Racks can be loaded to unoccupied parking stations until the Stainer configuration
for the used technological program allows them to do it
.
Completion of loading of racks.
CAUTION!
CLOSE THE LID OF THE WORKING CHAMBER and press the button
FINISH. After that, the Stainer starts to perform the technological program. If the lid is
open, a message requiring to close the lid appears. When loading is finished, the Stainer
returns to the performance of the technological program.
5.4.3 Unloading of racks.
Processed racks can be unloaded before all the loaded racks have been processed.
Processed racks are marked with green rectangles on the status screen (Fig. 27, the rack
at station No. 7 has already been processed).
To unload, check if there are already processed racks, and press the button
UNLOAD Fig. 27).
Manipulator is busy
. If the manipulator is busy, a message appears on the screen:
<AFTER TRANSFER OF THE RACK
DEVICE WILL UNLOAD
PROCESSED RACK>
Manipulator is free
. When the manipulator gets free, it takes the nearest
processed slide and moves it to the loading position above station No. 4, a message
appears on the screen:
<AFTER REMOVING OF THE RACK
PRESS THE BUTTON <CONTINUE>
Open the lid of the Stainer and take the processed rack out of the manipulator.
Press the button CONTINUE.
If there are several processed racks in the working chamber, the Stainer will unload
all of them before continuing to process the remaining unprocessed slides. When the