MKS T3PIA, Instruction Manual, Page: 19 / 70

Unpacking the Type T3P Unit Chapter Two: Installation
11
Chapter Two: Installation
Unpacking the Type T3P Unit
MKS has carefully packed the Type T3P unit so that it will reach you in perfect operating order. Upon
receiving the unit, however, you should check for defects, cracks, broken connectors, etc., to be certain that
damage has not occurred during shipment.
Note
Do not discard any packing materials until you have completed your inspection and are sure
the unit arrived safely.
If you find any damage, notify your carrier and MKS immediately. If it is necessary to return the unit to
MKS, obtain an ERA Number (Equipment Return Authorization Number) from the MKS Service Center
before shipping. Please refer to the inside of the back cover of this manual for a list of MKS Calibration and
Service Centers.
Caution Only qualified individuals should perform the installation and any user adjustments.
They must comply with all the necessary ESD and handling precautions while
installing and adjusting the instrument. Proper handling is essential when working
with all highly sensitive precision electronic instruments.
Unpacking Checklist
Standard Equipment:
„
Type T3P Unit
„
Type T3PIA Pendulum Valve With Analog/TTL Interface Instruction Manual (this book)
„
MKS Type T3BIA/T3PIA Valves with RS-232 Interface Supplement , MKS p/n 134414-P1
You will need the Supplement to perform the installation using the procedures provided in this manual.
Interface Cables
Note
An overall metal braided, shielded cable, properly grounded at both ends, is required to meet
CE Mark specifications.