65
5
Maintenance and inspectio
n
5.4 LAN Port
10BASE-T and 100BASE-TX
Internal network
The external LAN ports are connected to the operating table main controller and the touch panel interface
controller via the Eethernet hub in the operating table.
Maintenance
The external LAN ports are used for acquiring maintenance information such as the operating table operation log.
Connection with external systems
The operating table does not support connections with any genenal external devices or systems. Connections
with devices or systems other than those allowed by MIZUHO are not guaranteed to work. When you desire
to connect with external devices or network, please contact us.
Default IP settings
Operating table main controller
IP address: 192.168. 3.250
Subnet mask: 255.255.255. 0
Touch panel interface controller
IP address: 192.168. 3. 1
Subnet mask: 255.255.255. 0
Bluetooth, version v4.1
Wireless connection with the control unit
Wireless communication via Bluetooth is used for data communication between the operating table and the
control unit. Connection with general Bluetooth devices is out of support.
Precautions
If the wireless communication is set to the Bluetooth mode, the data communication between the operating
table and the control unit turns to the wireless communication via Bluetooth.
Do not use this function if your facility’s rule bans wireless communication.
Also, do not use the wireless communication via Bluetooth in the case that medical devices used together
could be affected with radio wave. Using the wireless communication via Bluetooth could affect other medical
devices, such as radio wave interference.
