54
4
Operatio
n
Attaching the head plate
WARNING
If the head plate moves, the patient may get injured.
The head plate can be attached to the back plate and
the Single Leg Section (reverse mode) only.
1.
Hold both sides of the head plate, align and insert the
insertion shafts of the head plate into the insertion holes
on the back plate or the Single Leg Section (in the reverse
mode).
2.
Check that the head plate is inserted securely and tighten
the back plate).
Head plate
Back plate
Head plate fixing knob
CAUTION
Insert the head plate into the back plate or Single
Leg Section. If the operating table is used with the
head plate inserted incompletely, it may get damaged.
Before lowering the table or placing it in a reverse
Trendelenburg position, check if there are any
devices under the leg plates. If the leg plates come
in contact with devices that are to be subjected to
excessive force, the leg plate insertion shaft may
be damaged.
Do not allow the operating table to move in
conjunction with the head plate when it is being
pulled out from the operating table. It may drop and
cause damage or injury.
