39
4
Operation
4.9 Tilting the back plate
WARNING
Keep your hands away from the following gap during the operation of the table.
You may get injured.
Gap between the back plate and waist plate
Gap between the back plate gear and rack
Back plate
Waist plate
Back plate gear
Rack
Moving up the back plate
1.
Press
.
The back plate moves up.
90°
Moving down the back plate
1.
Press
.
The back plate moves down.
40°
NOTE
The maximum angle
achieved in the back plate
up position is 90° to the level
position.
NOTE
The maximum angle
achieved in the back plate
down position is 40° to the
level position.
If the tabletop’s center point
is slid to the leg side from
the center position, the
operating table’s buzzer
may sound, and it may
stop moving since the back
plate is approaching the
interference area. With
the tabletop slid from the
center position toward the
head side from the center
point, the back plate can be
lowered more.
The back plate will not
move up to 45° or higher
to the level position when
the lift-up unit is up, and a
buzzer will sound.
Back plate
Lift-up
unit
45°
