Miyachi Unitek ISA Series, Operator'S Manual

Page: 39 / 122

CHAPTER 3: USING ISA SERIES PROGRAMMING FUNCTIONS
ISA-4001CR INVERTER POWER SUPPLY
990-364 3-9
Copy Setup Data Screen
This screen is used to transfer memory
contents between the Power Supply and
the Program Unit. The Program Unit can
store two sets of data. If you have more
than one Power Supply and wish to copy
data from one to the other, it can be done
by copying the data to the Program Unit
and then from the Program Unit to the

COPY SETUP DATA
>
ISA-2000A -------> MA-627A (MEMORY 1)
ISA-2000A -------> MA-627A (MEMORY 2)
ISA-2000A <------- MA-627A (MEMORY 1)
ISA-2000A <------- MA-627A (MEMORY 2)
SCHEDULE [ 001 ]
-------> SCHEDULE [ 002 ]-[ 002 ]
second Power Supply.
The Program Unit (MA-627A) can store two data sets (Memory 1 or Memory 1). When it is connected
to the Power Supply, the data stored in the memory of Power Supply are displayed.
ISA-2000A -----
Æ
MA-627A (MEMORY 1)
– This selection is used to transfer data from the Power Supply to
Memory 1 of the Program Unit.
ISA-2000A -----
Æ
MA-627A (MEMORY 2)
–
This selection is used to transfer data from the Power Supply to
Memory 2 of the Program Unit.
ISA-2000A
Å
----- MA-627A (MEMORY 1)
–
This selection is used to transfer data from Memory 1 of the
Program Unit to the Power Supply.
ISA-2000A
Å
----- MA-627A (MEMORY 2)
– This selection is used to transfer data from Memory 2 of the
Program Unit to the Power Supply.
SCHEDULE [001] ----
Æ
SCHEDULE [002] – [002]
– This function is used to copy a schedule in the Power
Supply to another schedule (or schedules) for creating a new schedule without changing the original
schedule.
Example:
To create a new schedule (to be designated Schedule 2) from Schedule 1, place the cursor
between the brackets after the first
SCHEDULE
(as shown shaded) and type 001. Then press
ENTER
:
SCHEDULE [ ____ ] -------> SCHEDULE [ ]-[ ]
Move the cursor to the second
SCHEDULE
, and enter
002
; then press
ENTER
. Move the cursor to the
third Schedule and again press
ENTER
. The screen should look like this:
SCHEDULE [ 001 ] -------> SCHEDULE [ 002 ]-[ 002 ]
You may now open Schedule 002 and make whatever changes are required.
To create more than one copy of Schedule 001 (to be designated 002 through 004, perform the same
operation as above, but enter 004 in the last
SCHEDULE
box, as shown below:
SCHEDULE [ 001 ] -------> SCHEDULE [ 002 ]-[ 004 ]