MITSUBISHI ELECTRONICS AMERICA, INC.
ST200 Series Technical Support Manual
51
January 2000
The following figure shows a typical placement of the CTU, but other locations like under the
package tray and against the rear seat bulkhead are acceptable. The CTU placement must be out
of the way and protected from loose items that may fall on top of the unit or bump the
connections.
Installations may be performed with fixtures not supplied by Mitsubishi. Keep in mind that if
the structural integrity of the non-supplied mounting fixtures meet or exceed the supplied
installation fixtures, these installation methods are not violations of the Mitsubishi Limited
Warranty. However, if substandard installation methods are used and subsequent damage results
due to the substandard installation method, the Mitsubishi Limited Warranty does not apply to
the repair of that damage.
The following items are important CTU installation considerations:
♦
Leveling
The CTU must be level when installed, especially when the BSU is connected. You
cannot level the BSU alone with the standard BSU mount. The "
!
"on the BSU must
point upward.
♦
Protected Area
BSU
Conn.
Antenna Unit
Connection
Terminal Port
DTE Port
Power Connector
