MITSUBISHI ELECTRONICS AMERICA, INC.
ST200 Series Technical Support Manual
111
January 2000
CrossTalk (version 2.3)
1. Connect computer to the CTU
Connect your computer to the CTU and configure the CTU as described in this appendix.
2. Configure CrossTalk
2.1
Pull down menu from “File”.
2.2
Select 1 NORMAL.XWP
2.3
Select “Continue” in dialog box “Phone Number”
: NORMAL .XWP
2.4
Pull down menu from “Settings”.
2.5
Select: “Connection...”
Connection Settings
2.5.1
Connection:
Local Modem
2.5.2
Under “Settings”, select “Dialing” and input the phone number to call and any
dialing modifiers.
2.5.3
Under “Settings”, select “Connection” and input:
Speed
4800
Flow Control:
NONE
Data Bits:
8
Parity:
NONE
Stop Bits:
1
2.5.4
Under “Settings”, select “Modem” :and select
“Current Modem Assignments”:
COMx Custom Hayes Smartmodem
4800/4800B
“Modem Profiles”:
Custom Hayes Smartmodem 4800/4800B
2.6
Click “OK”
2.7
Pull down menu from “Settings” and select: “File Transfer....”
Select “File Transfer”: Zmodem
2.8
Click “OK”
2.9
Save these terminal settings, under a different name, for future use of the MSAT, also
save these settings for the Host mode.
3. Placing a data call to a Host PC:
3.1
Pull down menu from “Action” and select: “Connection\Connect”
3.2
Under “Phone Number: [File Name] input the Host PC phone number you wish to call.
3.3
Select “Continue”
4.
Configure for receiving a data call in the Host PC Mode
4.1
Pull down menu: “File” and choose: “New”
4.2
In the “new” session window open the “Dialer”, and select “ANSWER” and choose
“Dial”.
4.3
In the “Answer a call” dialog box:
Choose “OK”, unless your require a password for the login sequence.
Choose “OK”, unless you wish to use an alternate download directory.
Choose “OK”, unless you wish to limit dial-in callers to the download directory only.
Choose your modem COMx Port and Speed.
4800
.
4.4
Click “OK”
