MITSUBISHI ELECTRONICS AMERICA, INC.
ST200 Series Technical Support Manual
97
January 2000
Quick Reference Procedures
Handset* Re-activation or Recommissioning
USER STEP/ACTION
RESULTING DISPLAY
NOTES
1. Press PWR for > 1/2 sec
(see notes with a - c)
See Below Dependent on
Situation (a - c)
a. TPB MT: this display shown
Recommissioning - go to step 2
Reactivation - Press *; go to step
11
b. Reactivation: commissioning
failure or CGS deactivation
Go to step 11
c. Recommissioning (excl.TPB)
Go to step 2 (B0XSXX displayed
if Status Monitor ON)
2. Press and Hold CLR
Same display as above
3. Wait 3 seconds; enter Access
Code (8761015)
Complete input within 7 seconds
(within 10 seconds after power on)
4. Release CLR
5. Enter 10 digit Telephone #
Press SEND
Change # if applicable, received
from MSAT Service Provider
6. Enter 4 digit Security Code
Press SEND
Pick random or user defined code;
inform user of code
7. Enter 3 or 4 digit Emergency #
Press SEND
911 is default and always valid;
enter another # if available
8. Enter 2 digit Antenna Type
Press SEND
01= ST211
05 = ST251
07 = ST221M
9. Enter new 20 digit SASK (no* )
Press SEND;
then STO/ END
Tone will sound and MT will
power off automatically
Received from Service Provider;
input and check 5 digits at a time
10. Press PWR for >1/2 sec
Same as display from step 1
11. Ensure Status Monitor is ON
(FCN 84,sec code,#,STO/END)
Same as display from step 1
Turn Status Monitor ON before
acquisition and commissioning
12. Press FCN 94
13. Press #
Press STO/END
Same as display from step 1
Turn AutoCOM ON for
reactivation or recommissioning
14. Press FCN 931
15. Enter 10 digit PFC
Press STO/END
Stored PFC should be valid unless
MT has changed beam location
16. Enter 10 digit CFC
Press STO/END
Stored CFC should be valid unless
MT has changed beam location
17. Press SEND; then wait (~ 2-10
minutes)
See Section 7.5 for all displays
18. Turn Status Monitor Off
Same as turning ON
B0XSXX
OK*/NG#
ShutDwn
PushPWR
COM NG
PushPWR
SAT
-ON-
NO
MIN=800
1234567
MIN=800
1234567
SecCode
=1234
EMG.No
= 911
AU Type
= 03
ASK=XXX
XXXXXXX
AutoCOM
OFF
PFC= 155
XXXXXXX
CFC=155
XXXXXXX
To Srch
PushSND
B0XSXX
M:PILOT
B0XSXX
-ON-
SAT
-ON-
