manualshive.com logo in svg

Mitsubishi QJ71MB91, User Manual

The Mitsubishi Electric QJ71MB91 user manual is essential when operating this advanced product. This comprehensive manual provides in-depth instructions and helpful tips, allowing users to make the most of their device's capabilities. Download it for free from our website and maximize your experience with this outstanding Mitsubishi Electric product.

Share
Download
background image

A

 - 7

CHAPTER4 MODBUS(R) STANDARD FUNCTIONS

4 - 1 to 4 - 60

4.1

MODBUS(R) Standard Function Support List •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••4 - 1

4.2

Frame Specifications ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 10

4.2.1

Frame mode•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 11

4.3

Protocol Data Unit Formats by Functions •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 15

4.4

Read Coils (FC: 01) •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 18

4.5

Read Discrete Inputs (FC: 02)•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 19

4.6

Read Holding Registers (FC: 03) •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 20

4.7

Read Input Registers (FC: 04) ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 21

4.8

Write Single Coil (FC: 05) ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 22

4.9

Write Single Register (FC: 06) ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 23

4.10 Read Exception Status (FC: 07) ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 24

4.11 Diagnostics (FC: 08) ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 25

4.11.1 Return query data (sub-function code: 00) ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 25
4.11.2 Restart communications option (sub-function code: 01)••••••••••••••••••••••••••••••••••••••••••••• 4 - 26
4.11.3 Return diagnostic register (sub-function code: 02) ••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 28
4.11.4 Change ASCII input delimiter (sub-function code: 03) ••••••••••••••••••••••••••••••••••••••••••••••• 4 - 30
4.11.5 Force listen only mode (sub-function code: 04) ••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 31
4.11.6 Clear counters and diagnostic register (sub-function code: 10)•••••••••••••••••••••••••••••••••••• 4 - 33
4.11.7 Return bus message count (sub-function code: 11)•••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 35
4.11.8 Return bus communication error count (sub-function code: 12) ••••••••••••••••••••••••••••••••••• 4 - 36
4.11.9 Return bus exception error count (sub-function code: 13) •••••••••••••••••••••••••••••••••••••••••• 4 - 37
4.11.10 Return slave message count (sub-function code: 14)•••••••••••••••••••••••••••••••••••••••••••••••• 4 - 38
4.11.11 Return slave no response count (sub-function code: 15) ••••••••••••••••••••••••••••••••••••••••••• 4 - 39
4.11.12 Return slave NAK count (sub-function code: 16) ••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 40
4.11.13 Return slave busy count (sub-function code: 17) ••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 41
4.11.14 Return bus character overrun count (sub-function code: 18) ••••••••••••••••••••••••••••••••••••••• 4 - 42
4.11.15 Return IOP overrun error count (sub-function code: 19) •••••••••••••••••••••••••••••••••••••••••••• 4 - 43
4.11.16 Clear overrun counter and flag (sub-function code: 20) ••••••••••••••••••••••••••••••••••••••••••••• 4 - 44

4.12 Get Communications Event Counter (FC: 11)••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 45

4.13 Get Communications Event Log (FC: 12) •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 47

4.14 Write Multiple Coils (FC: 15)•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 50

4.15 Write Multiple Registers (FC: 16) •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 52

4.16 Report Slave ID (FC: 17) •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 53

4.17 Read File Record (FC: 20) (SC: 06)••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 55

4.18 Write File Record (FC: 21) (SC: 06)••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 57

4.19 Mask Write Register (FC: 22)••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 59

4.20 Read/Write Multiple Registers (FC: 23) •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 - 60

CHAPTER5 FUNCTIONS

5 - 1 to 5 - 22

5.1

Function List •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••5 - 1

5.2

Master Function •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••5 - 3

Summary of Contents for QJ71MB91





















































































































































































































































































































































































Reviews:

No comments

Related manuals for QJ71MB91

D-Link DSN-640 Quick Installation Manual preview
DSN-640
Brand: D-Link Pages: 40
UniKey SR3 Installation Manual & User Manual preview
SR3
Brand: UniKey Pages: 20
Jedia JMA-5104 Operating Instructions Manual preview
JMA-5104
Brand: Jedia Pages: 12
JED Micro T470 User And Installation Manual preview
T470
Brand: JED Micro Pages: 10
JCM Technologies SESAME Rapid Installation Manual preview
SESAME
Brand: JCM Technologies Pages: 2
D&R ELECTRONICS F5S-IQ Series Installation Manual preview
F5S-IQ Series
Brand: D&R ELECTRONICS Pages: 12
National Instruments SCXI -1122 Calibration Procedure preview
SCXI -1122
Brand: National Instruments Pages: 17
Davey Torrium 2 TT45 Installation And Operating Instructions Manual preview
Torrium 2 TT45
Brand: Davey Pages: 12
G-Force UNDER CONTROL CP-30A PILOT User Manual preview
UNDER CONTROL CP-30A PILOT
Brand: G-Force Pages: 2
Savant SKL-3040-00 Quick Reference Manual preview
SKL-3040-00
Brand: Savant Pages: 2
Decagon GS3 Operator'S Manual preview
GS3
Brand: Decagon Pages: 27
Frico ERP Instruction Manual preview
ERP
Brand: Frico Pages: 12
Espressif Systems ESP32-C3 Series Hardware Design Manuallines preview
ESP32-C3 Series
Brand: Espressif Systems Pages: 30
Nibe F1255 Series User Manual preview
F1255 Series
Brand: Nibe Pages: 92
Mitsubishi A1SJ71LP21GE User Manual preview
A1SJ71LP21GE
Brand: Mitsubishi Pages: 16
ccei MPZ Technical Instructions preview
MPZ
Brand: ccei Pages: 16
Allen-Bradley 1771-OD Installation Data preview
1771-OD
Brand: Allen-Bradley Pages: 8
ICP DAS USA I-7045 Quick Start Manual preview
I-7045
Brand: ICP DAS USA Pages: 7

Brands by name

Popular brands

Load more brands