Mitsubishi MR-JE series, Instruction Manual

Page: 87 / 94

7. OBJECT LIBRARY
7 - 42
7.4.10 Touch probe function status (60B9h)
Index
Sub
Index
Name
Data
type
Read/
write
60B9h 0 Status of the touch probe function (Touch probe status) 2 bytes Reading
The current status of the touch probe function can be checked. The description of this object is as follows.
Bit Description
0
0: Latch function of touch probe is disabled
1: Latch function of touch probe is enabled.
1
0: Latch is incomplete at the rising edge with the latch function of the touch probe.
1: Latch is complete at the rising edge with the latch function of the touch probe.
2
0: Latch is incomplete at the falling edge with the latch function of the touch probe.
1: Latch is complete at the falling edge with the latch function of the touch probe.
3 to 15 The value at reading is undefined.
Bit 0 indicates the status of the touch probe function. 0 indicates disabled, and 1 enabled.
With bit 1, if the data is latched at the rising edge of the touch probe can be checked. Latched data can be
read when this bit is set to "1". When this bit turns on, it remains on until bit 4 of the touch probe setting
(60B8h) is set to "0".
With bit 2, if the data is latched at the falling edge of the touch probe can be checked. Latched data can be
read when this bit is set to "1". When this bit turns on, it remains on until bit 5 of the touch probe setting
(60B8h) is set to "0".
7.4.11 Rising edge position of touch probe (60BAh)
Index
Sub
Index
Name
Data
type
Read/
write
60BAh 0
Rising edge position of touch probe (Touch probe position
positive value)
4 bytes Reading
The current rising edge position of touch probe can be checked.
7.4.12 Falling edge position of touch probe (60BBh)
Index
Sub
Index
Name
Data
type
Read/
write
60BBh 0
Falling edge position of touch probe (Touch probe position
negative value)
4 bytes Reading
The current falling edge position of touch probe can be checked.