Mitsubishi MMES User Manual Download Page 91

Page: 91 / 135

10. CONTROLS

CAUTION

• When not updating the map data, do not

remove the map SD memory card. If you
remove the map SD memory card, the
unit will not start.

• When removing the SD memory card

to update the map data, make sure the
vehicle is set to ACC-OFF.

• Do not edit any data on the map SD

memory card or connect the map SD
memory card to a personal computer,
etc. This may cause errors.

Operation panel

1 2

3 4

5 6

789

With the operation panel open

! @

Functions of Buttons

Note:

•

Be sure to read this section while referring to
the front diagram.

•

If your car has a rheostat feature, you can
adjust the button illumination level.

[AV] button

• Press this button to display/hide the

Source screen to switch the source
mode.

[

{

], [

}

] (Volume) buttons

• Use these buttons to increase/decrease

the volume.

[ ], [ ] (TUNE/TRACK) buttons

• In Tuner mode, press these buttons

to seek up/down by 1 step. Press and
hold these buttons to seek a station
automatically.

• In DVD, Audio CD, MP3/WMA/AAC,

SD memory card, USB memory, iPod

and Bluetooth Audio modes, use these
buttons to select a track to be played.

• In DVD, Audio CD, MP3/WMA/AAC,

SD memory card, USB memory, iPod,
and Bluetooth Audio modes, pressing
and holding a button during playback
performs the fast-forward/fast-backward
operation.

[MAP] button

• Press this button to display the Map

screen of the current location in any
mode.

• When the destination is set, keep

pressing this button for more than
about 1.5 seconds to check the current
guidance message.

[POWER] button

• Press this button to turn on/off the audio

features of this unit.

• Press and hold this button to turn off the

display.

Microphone

• The built-in microphone is for a Bluetooth

telephone.

Note:

•

Do not put a pointed object into the hole
of the microphone. This may damage the
microphone.

[OPEN/TILT] button

• Use this button to open/close the

operation panel.

[DEST] button

• Press this button to display the

Destination Menu screen in any mode.

• Keep pressing this button for more than

about 1.5 seconds to display the Go
Home screen in any mode.

[MENU] button

• Press this button to display the Main

Menu screen in any mode.

Disc slot

• Insert a DVD Video, CD, or disc with MP3/

WMA/AAC files into the unit to play it.

SD memory card slot

• Insert an SD memory card with MP3/

WMA/AAC files into the unit to play them.

Map SD memory card slot

• This card slot is used for an SD memory

card with map data.

205-0010-00_QY-7375M-A_EN.indb 91

3/12/2013 9:57:26 AM

Summary of Contents for MMES








































































































































Search results

Summary of Contents for MMES

Reviews:

Mitsubishi MMES, User Manual, Page: 91 / 135

Search results

Summary of Contents for MMES

Reviews: