manualshive.com logo in svg

Mitsubishi MMES, User Manual, Page: 10 / 135

Share
Download
Mitsubishi MMES User Manual Download Page 10

10

1. WARNINGS 

AND SAFETY 
INFORMATION

The navigation system helps you find your 
way to your destination with a connected 
GPS receiver. MMES does not transmit your 
position; others cannot track you.

If you accept it when first using the 
application, MMES collects usage information 
and GPS logs that may be used for improving 
the application and the quality and coverage 
of maps. The data is processed anonymously; 
no one will be able to track any personal 
information. If you change your mind later, 
you can enable or disable the log collection in 
Settings (page 74).

It is important that you look at the display only 
when it is safe to do so. If you are the driver of 
the vehicle, we recommend that you operate 
MMES before you start your journey. Plan the 
route before your departure and stop if you 
need to change the route. Some operations 
are restricted while driving for safety.

You must obey the traffic signs and follow 
the road geometry. If you deviate from the 
recommended route, MMES changes the 
instructions accordingly.

 2. GETTING 

STARTED

MMES is optimized for in-car use. You can 
use it easily by tapping the screen buttons and 
the map with your fingertips.

When using the navigation software for 
the first time, an initial setup process starts 
automatically. Do as follows:

1.  Select the language and voice used for 

voice guidance messages. Later you can 
alter your selection via the Sound and 
Warnings settings (page 66).

2.  If needed, modify the settings. Later you 

can alter your selection via the Regional 
settings (page 73).

3.  If needed, modify the default route 

planning options. Later you can alter your 
selection via the Route settings (page 68).

4.  The initial setup is now complete. The 

Configuration wizard can be restarted 
later from the Settings menu (page 64).

After the initial setup process, the Navigation 
menu appears and you can start using MMES.

205-0010-00_QY-7375M-A_EN.indb   10

205-0010-00_QY-7375M-A_EN.indb   10

3/12/2013   9:57:14 AM

3/12/2013   9:57:14 AM

Summary of Contents for MMES








































































































































Reviews:

No comments