manualshive.com logo in svg

Mitsubishi MMES, User Manual, Page: 135 / 135

Share
Download
Mitsubishi MMES User Manual Download Page 135

135

Problem

Measure

The iPod cannot be operated.

Disconnect the USB connection, start playback from the iPod, and then reconnect the iPod.

Disconnect the USB connection, reset the iPod, and then reconnect the iPod.

Audio is not output from the iPod.

From your iPod, change the audio output setting from Bluetooth (“Car-Navi”) to the dock connector.
Disconnect the iPod and then reconnect it.

Bluetooth Audio

Problem

Measure

The Bluetooth device cannot connect with 
the unit.

Correctly connect a Bluetooth-compatible mobile phone.

É

 “Pairing a Bluetooth audio player” (page 120)

Turn on the power of the audio device.

Connection may not be possible and sound may skip depending on the location of the Bluetooth audio 
device. Place the Bluetooth audio device in an area with good signal transmission.

Playback is not possible.

Use an audio device compatible with AVRCP.

Disconnect the audio device, and then reconnect it.

Start the player of the connected audio device.

Track names, artist names, and album names 
are not displayed correctly.

Use an audio device compatible with AVRCP 1.3.
Perform playback by initiating playback from the player of the connected audio device.

Audio is no longer output from the connected 
audio device.

Select the Bluetooth audio device again from the Bluetooth setting screen.

If an error display other than the ones described above appears, turn off and on the ACC power to restart the system. If the problem persists, consult 
your Mitsubishi Motors dealer. 

205-0010-00_QY-7375M-A_EN.indb   135

205-0010-00_QY-7375M-A_EN.indb   135

3/12/2013   9:57:30 AM

3/12/2013   9:57:30 AM

Summary of Contents for MMES








































































































































Reviews:

No comments