Mitsubishi MMES User Manual Download Page 132

Page: 132 / 135

132

Problem

Measure

Buttons are unresponsive just after the power
has been turned on.

Wait a short time before operating the unit.

“

Please open panel.

” appears on the screen,

and the map screen is not displayed.

Press the [

OPEN/TILT

] button, and touch the [

Panel Open/Close

] key to open the operation panel. If

the problem reoccurs, contact your Mitsubishi Motors dealer.

“

Check Map SD Memory Card.

” appears on

the screen.

Perform the following steps.
1. Press the [

OPEN/TILT

] button, and touch the [

Panel Open/Close

] key to open the operation panel.

2.  Turn the vehicle’s key to the OFF position.
3.  Open the map SD memory card slot cover.
4.  Remove and reinsert the map SD memory card.
5.  Close the map SD memory card slot cover.

Radio

Problem

Measure

Noise is heard.

Tune to the correct frequency.

“Radio operations” (page 105)

Automatic tuning cannot be performed.

Perform step tuning.

“Listening to the radio” (page 105)

DVD/CD/MP3/WMA/AAC

Problem

Measure

When you insert a disc, no sound is output or
the disc is quickly ejected.

Insert the disc with its label facing upward.

Some CD-R/RW discs and some CDs with copy protection cannot be played. Check the CD you want
to play.

Finalize the disc.

A Mix Mode CD cannot be played. Eject it from the DVD player.

8 cm discs cannot be played.

A disc cannot be ejected even when you
press the eject button.

Consult your Mitsubishi Motors dealer.

205-0010-00_QY-7375M-A_EN.indb 132

3/12/2013 9:57:30 AM

Summary of Contents for MMES








































































































































Search results

Summary of Contents for MMES

Reviews:

Mitsubishi MMES, User Manual, Page: 132 / 135

Search results

Summary of Contents for MMES

Reviews: