Mitsubishi MMES User Manual Download Page 31

Page: 31 / 135

c. Tap

to finish

entering the address. (If the entered
house number cannot be found, the
midpoint of the street is selected as the
destination.)

7. A full screen map appears with the

selected point in the middle. If necessary,
tap the map somewhere else to modify the

destination. The Cursor (

) appears at

the new location. Tap

to confirm the destination, or tap

to select a different

destination.

8. After a short summary of the route

parameters, the map appears showing
the entire route. The route is automatically

calculated. Tap

to modify route parameters, or tap

and start your journey.

Note:

•

If you know that you will use this destination

frequently, before tapping

to confirm the destination, put it on the list of

your Favorites first: tap

then

, give a name for the

new Favorite, and tap

save the location. The map with the destination
returns automatically. Now you can start your
journey.

Entering an address (Canada)

To enter an address as the destination, do as
follows:

1. If you are on the Map screen, tap

to return to the

Navigation menu.

2. In the Navigation menu, tap the following

buttons:

3. By default, MMES proposes the country,

state and city/town where you are. If

needed, tap

, enter the

first few letters of the destination country
or state on the keyboard, and select
one from the list. If you select a country
without a state, you can search for a city/
town in all its states.

4. If needed, select a new city/town:

a. Tap

b. Start entering the name of the city/

town on the keyboard.

205-0010-00_QY-7375M-A_EN.indb 31

3/12/2013 9:57:17 AM

Summary of Contents for MMES








































































































































Search results

Summary of Contents for MMES

Reviews:

Mitsubishi MMES, User Manual, Page: 31 / 135

Search results

Summary of Contents for MMES

Reviews: