manualshive.com logo in svg

Mitsubishi MMES, User Manual, Page: 16 / 135

Share
Download
Mitsubishi MMES User Manual Download Page 16

16

Type

Example

Description

How to use it

Switch

  

When there are only two choices, a checkmark 
shows whether the feature is enabled.

Tap it to turn the switch on or off.

Slider

When a feature can be set to different values in 
a range, MMES shows an indicator on a gauge 
that displays and sets the value.

•  Drag the handle to move the slider to its new 

position.

•  This operation is available in navigation-related 

screens only.

•  Tap the slider where you want the handle to 

appear; the thumb jumps there.

Virtual keyboard 
 

Alphabetic and alphanumeric keyboards to 
enter text and numbers.

Each key is a touch screen button.

 

q

Using keyboards

You only need to enter letters or numbers when you cannot avoid it. You can type with your fingertips on the full-screen keyboards and you can switch 
between various keyboard layouts, for example English, French or numerical. MMES supports address and POI name entry with a smart keyboard. 
After typing the first letter on the virtual keyboard, the keys that do not correspond to any possible matching name become inactive. This makes typing 
faster and helps in the spelling of complicated names. As soon as the number of matching names becomes small enough to fit on one screen, the 
software displays a list to choose from, so the user does not have to type the full word in most cases.

The smart keyboard continuously offers the most likely match based on previous destination selections. As a result, it is usually enough to type the first 
few letters of a city or street name.

205-0010-00_QY-7375M-A_EN.indb   16

205-0010-00_QY-7375M-A_EN.indb   16

3/12/2013   9:57:14 AM

3/12/2013   9:57:14 AM

Summary of Contents for MMES








































































































































Reviews:

No comments