manualshive.com logo in svg

Mitsubishi MMES, User Manual, Page: 14 / 135

Share
Download
Mitsubishi MMES User Manual Download Page 14

14

You have the following options:

• Tap 

 to select your 

destination by entering an address or 
selecting a place of interest, a location 
on the map or one of your Favorite 
destinations. You can also look up your 
recent destinations from the Smart History 
or enter a coordinate.

• Tap 

 to display the 

route parameters and the route in its full 
length on the map. You can also perform 
route-related actions such as editing or 
canceling your route, setting a start point 
for the route, picking route alternatives, 
avoiding parts of the route, simulating 
navigation or adding the destination to your 
Favorites.

• Tap 

 to customize the 

way the navigation software works, to 
simulate demo routes or to run some 
additional applications.

• Tap 

 to start navigating 

on the map. The button itself is a 
miniature live map that shows your current 
position, the recommended route and the 
surrounding map area. Tap the button to 
enlarge the map to the full screen.

•  Voice guidance is given when you press 

and hold the MAP button to the right of the 
screen for more than 1.5 seconds. You 
can use this function whenever a route has 
been set.

205-0010-00_QY-7375M-A_EN.indb   14

205-0010-00_QY-7375M-A_EN.indb   14

3/12/2013   9:57:14 AM

3/12/2013   9:57:14 AM

Summary of Contents for MMES








































































































































Reviews:

No comments