Mitsubishi MMES User Manual Download Page 107

Page: 107 / 135

107

Menu items

Operation keys

Note:

•

You can select menu items by touching them
directly.

2. Touch the [

] key to display the cursor/

keypad panel.

3. Using the cursor/keypad panel to perform

operations and start playback.
• Touch the [

], [

], and [

] keys

to select a menu item, and touch the
[

] key to play it.

• Touch the [

0-9

] key to display the keypad

panel. Touch the [

]

[

] keys to

input a number, and enter it with the
[

] key to play it. If you want to delete

numbers in the keypad panel, touch the
[

Clear

] key.

• Touch the [

Left

] or [

Right

] key to move

the cursor/keypad panel to the opposite
side of the screen.

[

Left

[

Right

• Touch the [

Top Menu

] or [

Menu

] key

to display the Top Menu or Menu,
respectively.

Note:

•

If you want to perform operations via direct
touch, touch the [

Back

] key once or twice to

hide the cursor/keypad panel.

Stopping playback

1. From the DVD Video mode screen, touch

and hold the [

] key for more than 1.5

seconds during playback.
Playback is stopped.

2. To resume playback, touch the [

] key.

Playback resumes from the scene where
playback was stopped.

1 2

Title number

Chapter number

Playback time

Playback mode

Menu navigation keys

Operation keys

Note:

•

If a DVD menu is automatically displayed after
you insert a disc, start playback from the DVD
menu.

“Using a DVD menu” (page 107)

•

When you touch the [

Menu Operation

] key, the

cursor/keypad panel is displayed and you can
perform operations.

“Using a DVD menu” (page 107)

Playing a DVD

Using a DVD menu

Note:

•

Depending on the DVD software, a Top Menu or
Menu may not be displayed.

1. From the DVD Video mode screen, touch

the [

Top Menu

] or [

Menu

] key during

playback.
The DVD menu appears.

205-0010-00_QY-7375M-A_EN.indb 107

3/12/2013 9:57:27 AM

Summary of Contents for MMES








































































































































Search results

Summary of Contents for MMES

Reviews:

Mitsubishi MMES, User Manual, Page: 107 / 135

Search results

Summary of Contents for MMES

Reviews: